4-20 Troubleshooting
Error Codes 0
Table 4-2. Error Codes
Error Codes Error Messages
006 Equipment Configuration Error
Causes:
1. CPU BIOS Update Code Mismatch
2. IDE Primary Channel Master Drive Error
(The causes will be shown before “Equipment Configuration Error”)
010 Memory Error at xxxx:xxxx:xxxxh (R:xxxxh, W:xxxxh)
070 Real Time Clock Error
071 CMOS Battery Bad
072 CMOS Checksum Error
110 System is disabled. An incorrect password was entered.
<No error code> Battery critically low. In this situation BIOS will issue four (4) short beeps,
then shuts the system down. No message is displayed.
<No error code> Temperature is critically high. In this situation BIOS shuts the system
down. No message is displayed.
To Next Page
Need help?
General
