1-22 Hardware Specifications and Configurations
D2D Recovery 0
The Acer Disk to Disk (D2D) recovery function allows you to use the recovery partition to
troubleshoot your computer.
1. Restart the computer.
2. During POST, press F1 to access the BIOS Setup screen.
3. Press to select the Main menu.
4. Press to select the D2D Recovery field and make sure it is set to Enabled.
5. Press F10 to save settings and close the BIOS Setup screen.
6. During POST, press Alt+F10 to enter the system recovery partition. This will display the
eRecovery Management window.
7. Follow the onscreen instructions to return your computer to factory condition.
System Block Diagram 0
Figure 1-11. System Block Diagram
To Next Page
Loading...
Need help?
General