Machine Maintenance 3-15
Removing the WLAN Module 0
1. Perform the “Removing the Back Cover” procedure described on page 3-12.
2. Unplug the two (2) antenna cables from the WLAN module.
Figure 3-15. WLAN Module Antennas
For reference during machine reassembly, note which cable color
corresponds to the main (black) and auxiliary (white) connectors.
3. Remove the screw securing the WLAN module.
Figure 3-16. WLAN Module Screw
Table 3-16. Screw
Step Screw Quantity Screw Type
WLAN Module Disassembly M2 × L3 1
To Next Page
Loading...
Need help?
General