55
Hardware Health and Performance Monitor
Use the Hardware Health and Performance Monitor settings page to
set a refresh interval for monitoring data, configure performance
threshold settings, specify email destinations to which alerts should be
sent when temperature, voltage, and fan speed abnormality is
detected or the pre-configured threshold is exceeded.
In the Hardware Health and Performance Monitor page, you can
configure the following settings:
• Auto Refresh - Sets the refresh interval to tell Windows Home
Server how frequent the monitoring data should be performed.
• Performance settings - Sets the performance threshold of the CPU,
Memory and Storage.
• E-Mail alert setting - Specify an email address to which alerts
should be sent.
• Launch SMTP setup - Configure the Simple Mail Transport setup.
To validate the email alert feature, it is required that you properly
configure email destinations and SMTP setup. Refer to “Set up email
alerts” on page 100 for more details.
For more information, click the Help button on the lower right hand
corner of the Hardware Health and Performance Monitor page.
To Next Page
Loading...
Need help?
General
