2.14 Air-conditioning system
2.14.1 Condenser
Clean the condenser
All repairs and maintenance work must only be carried out by qualified technicians.
DANGER:
Freezing from contact with refrigerant: If liquid refrigerant comes into contact with skin, it
may cause freezing. Avoid all skin contact with the refrigerant. Wear protective gloves
when working on the system.
WARNING:
Serious injury caused by parts that have moved: When working or standing close to
rotating drive shafts, parts that have been moved or tossed around may cause crushing,
cutting and impact injuries. Switch off the engine before removing and/or refitting the
transmission shaft and before cleaning, maintenance and repair work on PTO devices.
Wait until the PTO device has come to a complete stop. During the entire process of
removing and refitting the transmission shaft, ensure that there is no one, especially
children, in the cab.
Procedure
1.
Open the engine cover and remove the side
panels.
2.
If dirty, blow through or spray condensor (A)
from inside to outside.
3.
Attach the side panels, close the engine
cover and lock.
Fig. 70
2. Service and maintenance
Maintenance 59
530.020.020.011 Rev.A
To Next Page
Loading...
Need help?
General