10 Move down a level to view the first stored reading.
Reading memory is automatically turned off when you go to the
“parameter” level in the menu.
The first reading displayed is the first reading that was stored (FIFO).
If no readings are stored in memory, “
EMPTY” is displayed. The stored
readings are displayed with their units ( µ, m, k, etc.) when appropriate.
For example:
10.31607K: 1
11 Move across to view the two remaining stored readings.
The readings are stored horizontally on the “parameter” level.
If you press
< when you get to the “parameter” level, you will see the
last reading and you will know how many readings were stored.
12 Turn off the menu.
EXITING MENU
>
∨
>
Reading number
Exponent
Shift <
On/Off
Chapter 2 Front-Panel Menu Operation
To Use Reading Memory
48
To Next Page
Loading...
Need help?
General
