4-50
MegaZoom Concepts and Oscilloscope Operation
To save traces and setups to internal memory or to overwrite an existing floppy disk
file
To save traces and setups to internal memory or to
overwrite an existing floppy disk file
1Press the Save softkey to display the Save menu.
2Press the
To: softkey or turn the Entry knob to select a floppy disk file
or internal memory to be overwritten.
INTERN_n (n is 0, 1, or 2 for 54620-series and 0, 1, 2, or 3 for 54640-series) file
names are stored in internal non-volatile oscilloscope memory. QFILE_nn and
any other user-defined files are stored on the floppy disk. Each time you select
an internal memory or existing floppy disk file and save, the existing file will be
overwritten.
3 When you have selected the file name to be overwritten, press the
Press to Save softkey to save your current setup and waveform trace to
the file.
The names of the three internal memory files cannot be changed. If you want
to select a new file name, press the New File softkey.
To Next Page
Loading...
Need help?
General
