Alpine CDE-W235BT Quick Reference Guide

27-EN
Flash Memory Connection (optional)
1 Open the cover of the USB Port.
2 Connect the Flash Memory directly to the USB Port, or via
the USB cable.
1 Carefully, pull out the Flash Memory Device from the USB
cable or the USB Port.
2 Close the cover of the USB Port.
Notes
• Change to a source other than the Flash Memory mode, and then
remove the Flash Memory Device. If Flash Memory is removed in the
Flash Memory mode, data may be damaged.
• When removing Flash Memory, pull it out straight.
• If sound is not output or Flash Memory is not recognized even when
connected, remove the Flash Memory Device once, and then connect it
again.
• Route the USB cable away from other cables, etc.
• After removing the Flash Memory, close the cover of the USB Port to
prevent dust or foreign objects from entering and causing a
malfunction.
About MP3/WMA File of Flash Memory
Playing back MP3/WMA
MP3/WMA files are prepared, and then stored to a Flash Memory
Device. This unit can recognize at most 100 folders and 100 files per
folder stored in Flash Memory. Playback may not be performed if a Flash
Memory Device exceeds the limitations described above.
Do not make a file’s playback time more than 1 hour.
Media supported
This device can play back Flash Memory.
Corresponding File Systems
This device supports FAT 12/16/32 for Flash Memory device.
Connecting an iPod/iPhone
An iPod/iPhone can be connected to this unit by using the Interface
cable for iPod (included with iPod). When an iPod/iPhone is connected
to this unit, you can choose to control the iPod/iPhone using its own
controls or by the head unit controls. For details, refer to “Setting the
iPod Control” on page 28.
These instructions refer to controlling the iPod/iPhone from this Head
Unit (HU) only. Make sure iPod Control is set to HU (HEAD UNIT)
MODE. Refer to “Setting the iPod Control” on page 28. Refer to the
iPod/iPhone manual for operations using the iPod/iPhone.
Connect Flash Memory
Remove Flash Memory
USB Connection TerminalThis unit
Flash Memory
(sold separately)
or
Flash Memory
(sold separately)
Cable (sold
separately)
iPod/iPhone (optional)
SOURCE/
/REPEAT 4
/SHUFFLE 5




/ENTER/OPTION


ABC SKIP
Rotary encoder
Preset buttons
(1 through 3)
Preset buttons
(4 through 6)
USB Connection TerminalThis unit
iPod/iPhone
(sold separately)
Included with iPod/iPhone

Alpine CDE-W235BT Specifications

General

Audio system	4.0
MP3 playback	Yes
DVD Audio playback	No
Playback disc formats	CD audio
Audio formats supported	AAC, CD-A, MP3, WMA
Video formats supported	Not supported
AM band range	531 - 1602 kHz
FM band range	87.5 - 108 MHz
LW band range	153 - 281 kHz
Supported radio bands	FM, LW, MW
Preset stations quantity	30
Impedance	4 Ω
Output power	200 W
RDS features	RT, TA
Product color	Multicolor
Volume control	Digital
Disc types supported	CD, CD-R, CD-RW
Audio output channels	4.0 channels
Equalizer bands quantity	3
Display type	LCD
Display digits	28 digits
Display number of lines	2 lines
Video in	0
USB version	2.0
Bluetooth profiles	A2DP, AVRCP, HSP, SSP
USB ports quantity	1
Apple docking compatibility	iPhone, iPod
Material	Metal, Plastic
File format system	FAT 16/32
Power requirements	11 - 16 VDC
Compatible products	iPod / iPhone / Nokia
Key illumination color	Multi
Number of optical discs	1 discs
Operating temperature (T-T)	-10 - 60 °C

Weight and Dimensions

Depth	160 mm
Width	178 mm
Height	100 mm
Weight	1600 g
Dimensions (WxDxH)	178 x 160 x 100 mm