Alto-Shaam Combitherm CT PROFORMANCE Series Service Manual

10
•
MN-35949
•
Rev 07
•
01/20
•
Combitherm® CT PROformance™ and CT Classic™ Series Technical Service Manual
Operation — CTP
Full oven update:
IB, CB, and OB
Update the CB
(control board) only
Update the OB
(option board) only
Update the IB
(interface board) only
Return to
previous screen
So ware Upload Screen
NOTICE: A er the so ware update has
been completed, the oven may
automatically initiate a shutdown
and reboot sequence if required.
Press the ON button to power the oven on.
Touch the utilities icon.
Touch the download icon.
Touch the download new so ware icon.
Most so ware updates will require the full oven update
as shown below. Additional options are available in the
event a special need arises. Call our Service Department
for assistance with these special circumstances.
Remove the cover of the USB port on the oven.
Insert the USB drive. If the USB drive is not recognized
by the Combitherm, a question mark will appear on
screen. Try again with another  ash drive device or call
Alto-Shaam Service.
When the data has made a
successful transfer to the USB
drive, the screen will change.
Touch the green check mark
icon to complete the process.
Remove the USB drive and
replace the cover on the USB
port on the oven.
So ware Updates
The PROtouch controller plays an important part in our continuous improvement process. New features and abilities
can be loaded to your oven as they become available. So ware for your oven can be accessed from the Alto-Shaam
website, under the Resource Library Tab, then So ware Center. http://www.alto-shaam.com/en/so ware-downloads
Use a USB drive to copy the PROtouch so ware from the website to the USB drive.
Soware Updates

Alto-Shaam Combitherm CT PROFORMANCE Series Specifications

General

Brand	Alto-Shaam
Model	Combitherm CT PROFORMANCE Series
Category	Oven
Language	English