RS2220001 Rev. 2 16
PAUS (PAUSE)
WDYRC Operating Instructions
Display
Many items in display can be seen but will not glow.
:
Counts down heating time.
"EOC"
(End of Cycle)
Lights at end of heating cycle. Remains in display until door
is opened.
"POWER" Lights when microwave power is supplied to oven cavity.
Pads Description
START
Begins heating cycle. If
START
is pressed while heating
cycle is paused, new heating cycle begins.
RESTART
If door is opened and heating is paused,
RESTART
pad
resumes paused heating cycle.
Pad Time Power Level
1 BAG
PITA
25 sec. 100%
2 BAG
PITA
50 sec. 100%
1 DOZ
BUN
30 sec. 100%
2 DOZ
BUN
1 min. 100%
ITEM
ADD DEL
STG QTY
2
3
4
P
LMT MENU1 MENU2 MENU3 MENU4
POWER
COOK
LEVEL
Connecting Power
When unit is plugged in or powered after the loss of
electricity, it will take several seconds before dashes and
menu indicator display. Once displayed, unit is
operational.
Interrupting Operation
Open oven door to interrupt operation. Oven fan
continues to operate. Close door and press
RESTART
pad to resume oven operation.
Canceling Mistakes
If oven door is open and time shows in display, close
oven door and press
RESTART
pad to resume heating
cycle or a
START
to begin new heating cycle. If heating
cycle is paused and not restarted, remaining time clears
in 15 seconds. Oven door must be opened and closed
before starting a new heating cycle.
Heating with Preprogrammed Pads
Oven has 4 preprogrammed pads.
1. Open oven door and place food in oven. Display
shows “door”.
• Fan and light operate.
2. Close oven door. Display shows “MENU” and
“ITEM”.
• If oven display does not show “ITEM”, pads do not
accept entries. Open and close oven door to
activate pads.
3. Press desired a
START
pad and oven operates.
• Heating time counts down.
• Display shows “POWER” when microwave energy
is present.
4. Oven stops and signal sounds when timing
sequence is finished.
• Display shows "EOC".
5. Open oven door.
Wendy’s Recommended Performance Test
See “Owner’s Manual”.
To Next Page
Loading...
Need help?
General
