Amana MC22MP User Manual

25 RS2220001 Rev. 2
Service Test
Multiple H.V. System Testing
Two or three H.V. Systems may be tested together.
Below are display samples showing different
combinations.
NOTE: This is not showing actual amperage, but a
current reference.
Example: If one H.V. System is showing a current
reading of 15, then any two H.V. Systems
may have a reading of about 30, and all three
H.V. Systems may have a reading of about
45. Current reference readings will vary.
MENU1 MENU2
H.V. System 1 & 2
MENU1 MENU3
H.V. System 1 & 3
MENU1 MENU2 MENU3
H.V. System 1 , 2, & 3
Door Cycles and Magnetron Hours
• Press TIME ENTRY pad once for door cycles.
NOTE: Door cycle counter advances one number for
every 100 door cycles.
Example:
Display reads 156 x 100 = 15,600 (Actual
door cycles)
• Press TIME ENTRY pad again for H.V. section
# 1 hours.
• Press TIME ENTRY pad again for H.V. section
# 2 hours.
• Press TIME ENTRY pad again for H.V. section
# 3 hours.
• Press TIME ENTRY pad again reverts to door
cycles.
Door Cycles
Display
Magnetron Hours
Display
Number of
Door Cycles
Magnetron
Hours
Indicates Operating
H.V. System

Amana MC22MP Specifications

General

Brand	Amana
Model	MC22MP
Category	Microwave Oven
Language	English