APRILIA MANA 850 User Manual

SIS NUMBER WILL IMMEDIATELY IN-
VALIDATE THE WARRANTY
MER VEROORZAAKT HET ONMID-
DELLIJKE VERVAL VAN DE GARAN-
TIE
CHASSIS NUMBER
The chassis number is stamped on the
right side of the headstock.
Chassis No....................
FRAMENUMMER
Het framenummer is gedrukt op de kop
van het stuur, rechter kant.
Frame nr....................
ENGINE NUMBER
The engine number is stamped on the
base of the right-side engine crankcase.
Engine No. ....................
MOTORNUMMER
Het motornummer is gedrukt op het on-
derstel van de motorcarter, op de rechter
kant.
Motor nr....................
51
2 Vehicle / 2 Voertuing

APRILIA MANA 850 Specifications

General

Fuel System	Electronic fuel injection
Engine Type	V-twin, 4-stroke
Power	76 hp @ 8, 000 rpm
Torque	73 Nm @ 5, 000 rpm
Transmission	Automatic
Front Suspension	Upside-down fork
Rear Suspension	Single shock absorber
Front Brakes	Dual 320 mm discs
Rear Brakes	Single disc
Seat Height	800 mm
Fuel Capacity	16 liters
Maximum Torque	73 Nm @ 5, 000 rpm
Seat Height Detail	800 mm (31.5 inches)
Fuel Capacity Detail	16 l (4.2 US gal)
Maximum Power	56 kW @ 8, 000 rpm
Front Brakes Detail	Dual 320 mm stainless steel floating discs, radial calipers
Rear Brakes Detail	240 mm stainless steel disc, single piston caliper

Summary

General Rules

Fuel Handling and Safety

Precautions for handling highly flammable fuel, including ignition sources and environmental care.

Reporting Safety Defects

Procedure for reporting any mechanical or electrical defects affecting vehicle safety.

Vehicle Overview

Warning Lights, Alarms, and System Messages

Understanding indicator lamps, alarms, and system warnings for vehicle status.

Rider Controls: Operation and Functions

How to operate ignition, steering lock, horn, signals, lights, starter, and engine stop controls.

Immobilizer System and Security Features

Explanation of the electronic immobilizer system for theft protection.

Using Your Vehicle

Pre-Ride Checks and Inspections

Essential checks of critical components like brakes, tyres, oil, and steering before riding.

Refuelling Procedures and Safety

Step-by-step guide for safely refuelling the vehicle, including fuel type and capacity.

Engine Running-In and Start-up Procedures

Guidelines for breaking in the engine and safe start-up procedures.

Riding Practices: Moving Off, Braking, Stopping, and Parking

Safe riding techniques, starting, stopping, and parking the motorcycle.

Transmission Modes and Rider Controls

Vehicle Security, Safety, and Theft Prevention

Basic Riding Safety and Handling

Fundamental safety practices for mounting, dismounting, and general vehicle handling.

Maintenance

Engine Oil Management: Level, Top-Up, and Replacement

Procedures for checking, topping up, and changing engine oil and filter.

Tyre Maintenance and Pressure Checks

Cooling Fluid and Brake Fluid Level Management

Battery Maintenance and Charging

Brake System Checks and Pad Replacement

Drive Chain Maintenance

Programmed Maintenance

Scheduled Maintenance Table and Intervals

Comprehensive table detailing recommended maintenance tasks at various mileage and time intervals.