Argo 2S User Manual

CH3 安裝 Installation Original
14
3.1 機器之搬動 Handing
方法 1
如左圖所示，在吊起機器之前，先將頭部迴
轉並固定，然後用 5/8”惠氏螺紋之吊環將其
確實鎖牢於伸出臂之螺紋孔內再行吊動
Method 1
Insert 5/8” 11NC eye bolt in tapped hole.
Ensure bolt is fully secured before lifting. It is
advisable to swivel head before lifting machine.
方法 2
如左圖所示，在吊起機器之前，先將頭部前
傾並固定，然後掛上適當的繩索，並在繩與
機器接觸處墊上軟布墊，再行吊動。
Method 2
Use rope sling as illustrated. Insert pads of soft
cloth between rope and machined edges. It is
advisable to tilt the head before lifting machine.

Argo 2S Specifications

General

Brand	Argo
Model	2S
Category	Power Tool
Language	English