EasyManuals Logo
Home>Asus>Motherboard>M2N-MX DVI2

Asus M2N-MX DVI2 User Manual

Asus M2N-MX DVI2
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
2-6
Chapter 2: BIOS setup
2.1.4 ASUS CrashFree BIOS 2 utility
The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to
restore the BIOS le when it fails or gets corrupted during the updating
process. You can update a corrupted BIOS le using the oppy disk that
contains the updated BIOS le.
Prepare the oppy disk containing the updated motherboard BIOS
before using this utility.
Make sure that you rename the original or updated BIOS le in the
oppy disk or the USB ash disk to M2N-MX.ROM.
Recovering the BIOS from a floppy disk
To recover the BIOS from a oppy disk:
1. Turn on the system.
2. Insert the oppy disk with the original or updated BIOS le to the
oppy disk drive.
3. The utility displays the following message and automatically checks
the oppy disk for the original or updated BIOS le.
Bad BIOS checksum. Starting BIOS recovery...
Checking for oppy...
4. Restart the system after the utility completes the updating process.
When found, the utility reads the BIOS le and starts ashing the
corrupted BIOS le.
Bad BIOS checksum. Starting BIOS recovery...
Checking for oppy...
Floppy found!
Reading le “M2N-MX.ROM”. Completed.
Start ashing...
DO NOT shut down or reset the system while updating the BIOS! Doing
so can cause system boot failure!

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Asus M2N-MX DVI2 and is the answer not in the manual?

Asus M2N-MX DVI2 Specifications

General IconGeneral
BrandAsus
ModelM2N-MX DVI2
CategoryMotherboard
LanguageEnglish

Related product manuals