Asus M2N-MX DVI2 User Manual

2-1 8
Chapter 2: BIOS setup
North Bridge chipset Conguration
Memory Conguration
Memclock Mode [Auto]
MCT Timing Mode [Auto]
Enable Clock to ALL DIMMs [Disabled]
MemCLK Tristate C3/ATLVID [Disabled]
Memory Hole Remapping [Enabled]
Power Down Control [Auto]
NorthBridge Configuration
2.4.2 Chipset
The Chipset menu allows you to change the advanced chipset settings.
Select an item then press <Enter> to display the sub-menu.
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause the system to malfunction.
NorthBridge Conguration
Southbridge
Hyper Transport Conguration
MTRR Mapping [Continuous]
This option determines the method used for programming CPU MTRRs when
4GB or more of memory is present. Discrete leaves the PCI hole below the
4GB boundary undescribed. Continuous explicitly describes the PCI hole as
non-caheable. Conguration options: [Continuous] [Discrete]
Runtime Legacy PSB [Disabled]
Enables or disables the generation of Power State Block for use of
PowerNow(tm) driver in a single core system.
Conguration options: [Disabled] [Enabled]
ACPI 2.0 Objects [Enabled]
Enables or disables the generation of ACPI_PPC, _PSS, and _PCT objects.
Conguration options: [Disabled] [Enabled]

Asus M2N-MX DVI2 Specifications

General

CPU Socket Type	AM2
PCI Express x16	1
PCI Express x1	1
PCI Slots	2
Audio Chipset	Realtek ALC662
Audio Channels	6
Max. LAN Speed	10/100 Mbps
Form Factor	Micro ATX
Memory Slots	2
Memory Standard	DDR2
SATA	4
IDE	1
LAN Chipset	Realtek RTL8201CL
Video Ports	DVI, VGA