4-32 Chapter 4: Software support
4.5 Creating a RAID driver disk
®
XP
operating system on a hard disk drive that is included in a RAID set. For Windows
®
the RAID driver.
• . You have
• Windows
®
Windows
®
XP limitation. To work around this OS limitation, refer to section
.
4.5.1 Creating a RAID driver disk without entering the OS
To create a RAID driver disk without entering the OS
1. Boot your computer.
2. Press <Del> during POST to enter the BIOS setup utility.
3. Set the optical drive as the primary boot device.
4. Insert the support DVD into the optical drive.
5. Save changes and exit BIOS.
6. When the Make Disk menu appears, press <1> to create a 32/64bit Intel
AHCI/RAID driver disk.
<Enter>.
8. Follow the succeeding screen instructions to complete the process.
4.5.2 Creating a RAID driver disk in Windows
®
To create a RAID driver disk in Windows
®
:
1. Start Windows
®
.
3. Place the motherboard support DVD into the optical drive.
4. Go to the Make Disk menu, and then click Intel AHCI/RAID Driver to create
an Intel
®
RAID driver disk.
6. Follow the succeeding screen instructions to complete the process.
To Next Page
Loading...
Need help?
General
