3-10 Chapter 3: BIOS setup
3.3.1 Ai Overclock Tuner [Auto]
Allows selection of CPU overclocking options to achieve desired CPU internal
Manual Allows you to individually set overclocking parameters.
Auto Loads the optimal settings for the system.
X.M.P. If you install memory module(s) supporting the eXtreme
the system performance.
CPU Level Up Allows you to select a CPU level, and the related parameters
will be adjusted automatically.
Memory Level Up Allows you to select a memory level, and the related
parameters will be adjusted automatically.
This item appears only when you set the Ai Overclock Tuner item to [X.M.P.] and
allows you to select the X.M.P. mode supported by your memory module.
3.3.3 OC From CPU/Memory Level Up [Auto]
These item appear only when you set the Ai Overclock Tuner item to [Manual].
3.3.4 CPU Ratio Setting [Auto]
Allows you to adjust the ratio between CPU Core Clock and FSB Frequency.
Use the <+> and <-> keys to adjust the value. The valid value ranges differently The valid value ranges differently
according to your CPU model.
3.3.5 Intel(R) SpeedStep(TM) Tech [Enabled]
When set to [Disabled], the CPU runs at its default speed. When set to [Enabled],
the CPU speed is controlled by the operating system.
3.3.6 Intel(R) TurboMode Tech [Enabled]
This item appears only if you set the CPU Ratio Setting item to [Auto]. Turbo
To Next Page
Loading...
Need help?
General
