Asus RT-AC1900 Dual Band User Manual

11
1.6 Router Setup
IMPORTANT!
• Useawiredconnectionwhensettingupyourwirelessrouterto
avoid possible setup problems.
• BeforesettingupyourASUSwirelessrouter,dothefollowing:
 • Ifyouarereplacinganexistingrouter,disconnectitfromyour
network.
 • Disconnectthecables/wiresfromyourexistingmodemsetup.If
your modem has a backup battery, remove it as well.
 • Rebootyourcablemodemandcomputer(recommended).
1.6.1 Wired connection
NOTE: You can use either a straight-through cable or a crossover cable
for wired connection.
To set up your wireless router via wired connection:
1. Insert your wireless router’s AC adapter to the DC-IN port and
plug it to a power outlet.
RT-AC1900
Computer
Wall Power Outlet
LAN
Modem
Power
WAN

Asus RT-AC1900 Dual Band Specifications

General

Maximum Data Rate	1900 Mbps (600 Mbps on 2.4 GHz + 1300 Mbps on 5 GHz)
Antenna	3x external antennas
RAM	256 MB
Flash Memory	128 MB
Security	WPA2-PSK, WPA-PSK, WPA-Enterprise, WPA2-Enterprise, WPS support
Wireless Standards	IEEE 802.11a/b/g/n/ac
Frequency Bands	2.4 GHz, 5 GHz
Ports	1 x Gigabit WAN, 4 x Gigabit LAN, 1 x USB 3.0, 1 x USB 2.0
Features	AiProtection, Parental Controls, Guest Network
Weight	750 g
Wi-Fi Technology	802.11ac Dual Band