Asus RT-AC1900 Dual Band User Manual

59
• Wireless multicast forwarding: Select Enable to allow the
wireless router to forward multicast traffic to other wireless
devices that support multicast. Select Disable to prevent the
router from forwarding multicast transmissions.
• Enable WMM APSD: Enable WMM APSD (Wi-Fi Multimedia
Automatic Power Save Delivery) to improve power
management between wireless devices. Select Disable to
switch off WMM APSD.
• TX Power adjustment: TX Power adjustment refers to the
milliWatts (mW) needed to power the radio signal output of
the wireless router. Enter a value between 0 to 100.
NOTE: Increasing the TX Power adjustment values may affect the
stability of the wireless network.
4.2 LAN
4.2.1 LAN IP
The LAN IP screen allows you to modify the LAN IP settings of your
wireless router.
NOTE: Any changes to the LAN IP address will be reflected on your
DHCP settings.

Asus RT-AC1900 Dual Band Specifications

General

Maximum Data Rate	1900 Mbps (600 Mbps on 2.4 GHz + 1300 Mbps on 5 GHz)
Antenna	3x external antennas
RAM	256 MB
Flash Memory	128 MB
Security	WPA2-PSK, WPA-PSK, WPA-Enterprise, WPA2-Enterprise, WPS support
Wireless Standards	IEEE 802.11a/b/g/n/ac
Frequency Bands	2.4 GHz, 5 GHz
Ports	1 x Gigabit WAN, 4 x Gigabit LAN, 1 x USB 3.0, 1 x USB 2.0
Features	AiProtection, Parental Controls, Guest Network
Weight	750 g
Wi-Fi Technology	802.11ac Dual Band