Asus RT-AC1900 Dual Band User Manual

64
4.3 WAN
4.3.1 Internet Connection
The Internet Connection screen allows you to configure the
settings of various WAN connection types.
To configure the WAN connection settings:
1. From the navigation panel, go to Advanced Settings > WAN >
Internet Connection tab.
2. Configure the following settings below. When done, click
Apply.
• WAN Connection Type: Choose your Internet Service Provider
type. The choices are Automatic IP, PPPoE, PPTP, L2TP or
fixed IP. Consult your ISP if the router is unable to obtain a
valid IP address or if you are unsure the WAN connection type.
•
Enable WAN: Select Ye s to allow the router Internet access.
Select No to disable Internet access.

Asus RT-AC1900 Dual Band Specifications

General

Maximum Data Rate	1900 Mbps (600 Mbps on 2.4 GHz + 1300 Mbps on 5 GHz)
Antenna	3x external antennas
RAM	256 MB
Flash Memory	128 MB
Security	WPA2-PSK, WPA-PSK, WPA-Enterprise, WPA2-Enterprise, WPS support
Wireless Standards	IEEE 802.11a/b/g/n/ac
Frequency Bands	2.4 GHz, 5 GHz
Ports	1 x Gigabit WAN, 4 x Gigabit LAN, 1 x USB 3.0, 1 x USB 2.0
Features	AiProtection, Parental Controls, Guest Network
Weight	750 g
Wi-Fi Technology	802.11ac Dual Band