Asus RT-AC1900 Dual Band User Manual

67
4.3.2 Port Trigger
Port range triggering opens a predetermined incoming port for a
limited period of time whenever a client on the local area network
makes an outgoing connection to a specified port. Port triggering
is used in the following scenarios:
•
More than one local client needs port forwarding for the
same application at a different time.
•
An application requires specific incoming ports that are
different from the outgoing ports.
To set up Port Trigger:
1. From the navigation panel, go to Advanced Settings > WAN >
Port Trigger tab.
2. Configure the following settings below. When done, click
Apply.
• Enable Port Trigger: Choose Ye s to enable Port Trigger.
•
Well-Known Applications: Select popular games and web
services to add to the Port Trigger List.
•
Description: Enter a short name or description for the service.

Asus RT-AC1900 Dual Band Specifications

General

Maximum Data Rate	1900 Mbps (600 Mbps on 2.4 GHz + 1300 Mbps on 5 GHz)
Antenna	3x external antennas
RAM	256 MB
Flash Memory	128 MB
Security	WPA2-PSK, WPA-PSK, WPA-Enterprise, WPA2-Enterprise, WPS support
Wireless Standards	IEEE 802.11a/b/g/n/ac
Frequency Bands	2.4 GHz, 5 GHz
Ports	1 x Gigabit WAN, 4 x Gigabit LAN, 1 x USB 3.0, 1 x USB 2.0
Features	AiProtection, Parental Controls, Guest Network
Weight	750 g
Wi-Fi Technology	802.11ac Dual Band