EN 20
USE
Selecting additional functions
Some functions are not available with some systems; an acoustic signal
will remind you of such cases.
Child lock
The oven’s Child Safety Lock allows you to lock the control panel to
protect the oven against unintended use.
• You can activate the child lock by holding down the “child lock key”
for a few seconds.
A lock symbol appears in the display, indicating that all functions
are locked.
• To deactivate the child lock, press the key for a few seconds again.
The lock symbol disappears in the display, indicating that all
functions are unlocked.
Note:
If the child lock is activated with no timer function engaged (only clock
is displayed), then the oven will not operate. If the child lock is activated
after a timer function has been set, then the oven will operate normally;
however, it will not be possible to change the settings.
When the child lock is activated, systems (oven modes) or additional
functions cannot be changed. The only possible change is to end the
cooking process by turn the ‘Mode selector’ to “0”.
Child lock remains active after the oven is switched off. To select a new
system, the child lock must first be deactivated.