EN 8
USE
First use
Setting the current time of day
When the appliance is first plugged in, the ‘display’ lights up. After
three seconds, the Clock symbol and “12:00” blink on the display.
1. Turn the ‘Multi-function selector’ to set the time of day.
2. Confirm the settings by pressing ‘start / stop’.
If nothing is pressed, the settings are stored automatically after
three seconds.
You can always set the current time by pressing the “timer
button” twice. Then turn the ‘Multi-function selector’ to set the
current time. Confirm the settings by pressing “start/stop”.
If nothing is pressed, the settings are stored automatically after
three seconds.
Using the oven
The oven has 10 oven functions and 1 cleaning function. Consult the
table to select the right oven function to prepare a dish.
1. Place the dish in the oven.
▷ Attention; for most dishes the oven has to be preheated first.
Please do not insert your food in the oven yet, but wait until the
preheating is complete.
2. Turn the ‘Mode selector’ to the desired oven setting.
The selected pictogram will appear on the display.
3. Touch the ‘Temperature / power key’.
4. Set the oven to the desired temperature using the ‘Multi-function
selector’ (between 30-250 °C).
5. Select, if required, a cooking time by pressing the ‘timer key’
6. Press the ’Start / stop’ key.
The oven will start the oven function set and heat the oven to the
selected temperature. The temperature symbol in the display will
flash. When the oven has reached the selected temperature, the
temperature symbol in the display will remain illuminated.
Multi-function
selector
Mode selector
Temperature /
power key
Start / stop key
To Next Page
Loading...
Need help?
General
Weight and Dimensions
