12
3. ANTI-FROST
In this mode the temperature setting is 7°C and is factory
set. Anti-frost is usually used as an off set point and for
long periods of absence when you want to avoid freezing.
4. PROGRAM
In Program mode the radiator automatically switches on
and off according to the daily and weekly program set by the user.
The daily program display is divided into two screens; the AM screen
is from 00:00 to 11:59, and the PM screen from 12:00 to 23:59.
The Program is shown around a circle, representing an analogue
clock face. The screen automatically switches the display between
the current time and the day of the week every 5 seconds.
The program screen is shown permanently and displays its particular
12 hour program divided into half-hour intervals; the AM and PM
programs will be displayed based on the time of day.
Each half-hour interval of each day of the week can be programmed
as comfort, eco or anti-freeze:
COMFORT ECO ANTI-FROST
The current half-hour interval flashes to indicate to the user what the
current set point is. Also, the Sun, Moon or Frost symbol is displayed
in the middle of the screen above the temperature.
In Program mode, comfort and eco set points can be directly modified with and keys,
when their particular mode is active, (anti-frost set point can never be modified). When the
comfort temperature is raised or lowered, the eco temperature automatically rises or falls by the
set amount.
Adaptive start control can be applied to Program mode and can be enabled or disabled in
Configuration mode (see page 18 for details of Adaptive start mode).
Program mode is the only mode in which this function operates
To Next Page
Loading...
Need help?
General
