16
6
. Reset Default
This menu is used to reset the heater back to the default factory settings.
• Comfort set point is 20ºC,
• Economy set point is 16.5ºC,
• Program is set to Economy for all half-hour sections of all days,
• The day is set to Monday,
• The time to 00:00,
• Brightness level at rest is set to 1,
• Maximum brightness time is set to 10s,
• Open Window and Adaptive start control are disabled,
• The radiator returns to Standby mode.
Heating and temperature display
When the room temperature is below the temperature set-point the radiator will turn the element
on to raise the room temperature. To show the user that the radiator is heating there is a symbol
of a thermometer being filled in the top right hand corner.
The room temperature is normally shown on the display, the set point temperature is only
displayed when the user attempts to change it; after the setting has been adjusted the display
will revert back to the room temperature:
The comfort and eco set-point temperatures can be modified both from comfort and economy
modes. The comfort and eco mode can be changed within program mode if they are active at
the time (the anti-frost set-point can never be modified).
Manual mode
The manual mode allows the user to manually operate the radiator overriding the current
setting. It is able to force the heater on or off for a set amount of time. After the time expires the
radiator will return to the previous mode of operation.
The manual mode is designed to allow a user to override the Program mode without having to
change the program itself. For example if you arrive when the heater is normally off, you can
heat the space to a comfortable temperature, and then have the heater return to its normal
mode without changing the program.
To Next Page
Loading...
