EasyManuals Logo
Home>ATC>Heater>LS500

ATC LS500 User Manual

ATC LS500
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2
IMPORTANT:
- To prevent overheating, do not cover the radiator.
- You must not sit on the radiator.
- This appliance is not intended for outdoor use.
- If the power cord is damaged, it must be changed by the
manufacturer, its after-sales service or persons qualified to
do so, to avoid possible danger.
- The radiator should not be located underneath an electrical
connection. The electric supply line should be protected with
a high sensitivity differential device (RCBO).
- The radiator must be installed so that around the radiator
there is sufficient space for proper circulation of hot air, with
a minimum distance of 100 mm to curtains, furniture, etc.
Anyone who is in the bathtub or shower should not have
access to the switches and other power operation devices,
always keep at least 0.6 m between the radiator and the
bath or shower.(UK: Outside zone 2, Ireland: Outside zone
3)
- This heating apparatus holds a specific amount of special
oil. Repairs where it is necessary to open the oil tank must
only be made by the manufacturer or ATC. ATC should be
contacted in case of any oil leakage.
- A Fused Spur must be included in the wiring to the heater.
- This appliance can be used by children aged 8 years and
above and persons with reduced physical, sensory or mental
abilities or lack of experience and knowledge, if they have
been given supervision or appropriate training regarding the

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ATC LS500 and is the answer not in the manual?

ATC LS500 Specifications

General IconGeneral
BrandATC
ModelLS500
CategoryHeater
LanguageEnglish

Related product manuals