Reference Name
1 Alarm
2 Service
3 Automatic operation
4 Voltage on
5 Enter
6 Escape
7 Scroll keys
8 Stop
9 Start
Procedure
Step Action
1 Press the start button. The compressor starts running in unloaded condition. The
automatic operation LED lights up.
2 Approx. 10 seconds later (programmable), the compressor starts running loaded.
5.4 During operation
Warning
The operator must apply all relevant Safety precautions.
The operator should immediately stop the machine in case of oil leaks internally in the
machine as well as externally and consult a competent technician to resolve the cause.
The machine should not be restarted before the problem has been remedied.
The load cycle of the compressor must be limited to maximum two cycles per minute.
Instruction book
58 APF221384
To Next Page
Loading...
Need help?
General
