Atlas Copco LG 504 User Manual

Stopping the engine, Hatz electric start
1. Move the throttle control to idling position.
For non EPA throttle control:
Move the throttle control handle to half throttle,
position (A).
For EPA throttle control:
Pull up the stop (B) to release the throttle control
handle. Move the throttle control handle to half
throttle, position (A).
NOTICE The EPA throttle control has three
fixed positions. Make sure the throttle control
handle is in a fixed position.
2. Allow the engine to idle for a few minutes.
3. Move the throttle control to the stop position (C).
For non EPA throttle control:
For EPA throttle control:
4. Stop the engine by turning the ignition key (D) to
position 0.
23© 2016 Construction Tools EOOD | No. 9800 1721 01 | 2016-04-07
Original instructions
Safety and operating instructionsLG 504

Atlas Copco LG 504 Specifications

General

Brand	Atlas Copco
Model	LG 504
Category	Power Tool
Language	English