Operating
DANGER Handle hazard
When changing the locking position, the handle must
be held, otherwise it can cause injuries.
► Hold the handle.
► Lower the handle with caution.
NOTICE During compaction work the engine must
always be run at full throttle.
Driving
Open throttle control fully.
♦
Forward operation:
Move the forward and reverse control forwards
with small movements.
♦
Reverse operation:
Move the forward and reverse control backwards
with small movements.
♦
Stationary:
Move the reverse control in the opposite direction
until the machine is stationary.
© 2016 Construction Tools EOOD | No. 9800 1721 01 | 2016-04-07
Original instructions
24
LG 504Safety and operating instructions
To Next Page
Loading...
Need help?
General
