EN Power Focus 600
2
© Atlas Copco Industrial Technique AB - 9836 4954 01
Overview
Safety and operating instructions
WARNING Read all warnings and all instructions. Failure to follow all
the instructions may result in electric shock, fire and/or serious personal
injury.
Ensure that you read and understand all instructions:
• Safety Information delivered together with the different parts of the sys-
tem.
• Product Instructions for installation, operation and maintenance of the
different parts of the system.
• All locally legislated safety regulations with regard to the system and
parts thereof.
Save all safety information and instructions for future reference.
WARNING Do not change system parameters at random.
• Changed parameters may result in risks of personal injury when handling
the tool.
• Included screenshots of the product interface only show examples of pa-
rameter settings or other configurations and are NOT intended to be gen-
erally applicable, unless otherwise stated.
NOTICE Changing parameters may lead to a decrease in tool performance and
may also slow down the production.
Contact your Atlas Copco representative if questions regarding the safety
and operating instructions arise.
Included images and screenshots
This manual includes screenshots from the product interface. The screenshots
can show examples of parameter settings or other configurations and are NOT
intended to be generally applicable, unless stated otherwise. Check with your
local Atlas Copco representative how to set up your specific system environ-
ment.
System architecture
IAM (Intelligent Application Module)
The Intelligent Application Module (IAM) contains the controller software,
configurations, results, and events. It is located on the backside of the front ac-
cess door and available in two different versions.
To Next Page
Loading...
Need help?
General
