- 52 -
Liability
The manufacturer does not accept any liability for any damage arising from the use
of non-original parts and for modifications, additions or conversions made without
the manufacturer’s written approval.
STORAGE
Run the compressor regularly, e.g. twice a week, until warm.
Load and unload the compressor a few times to operate the unloading and
regulating components. Close the air outlet valves after stopping.
FLEETLINK
The compressor can be equipped with the FleetLink as an option, an intelligent
smartbox system for fleet monitoring. Atlas Copco developed both hardware and
software to provide you with insights of the compressor performance.
Do the following steps:
1. Go to website http://fleetlink.atlascopco.com/.
2. Type the user name and password you received by email.
3. If you are a new user or forget your password, contact Customer Center
FleetLink administrator or product management team to set it up.
If the compressor is going to be stored without running regularly,
protective measures must be taken.
Contact Atlas Copco for correct measures.
DAILY MAINTENANCE COMPRESSOR BEFORE STARTING A JOB
DAILY MAINTENANCE UNDERCARRIAGE BEFORE A ROADGOING
JOB
Drain condensate and water from spillage-free
frame
see Spillage-free frame
Empty air filter vacuator valves see Air filter engine/
compressor
Check engine oil level (if necessary top up) see Engine oil level check
Check compressor oil level (if necessary top up) see Compressor oil level
check
Check coolant level see Coolant level check
Check/Fill fuel level after a day’s work
Check air intake vacuum indicators
Check on abnormal noise
Check control panel see Control panel
Check towbar, handbrake lever, spring actuator,
reversing lever, linkage and all movable parts for
ease of movement
Check coupling head for damage
Check height of adjusting facility see Height adjustment
Check tyre pressure see Technical specifications
Check safety cable for damage
Check tyres for uneven wear
For fluids to be used and their ordering numbers refer to the spare
parts manual.