EasyManuals Logo
Home>AudioCodes>Gateway>MediaPack 1 Series

AudioCodes MediaPack 1 Series User Manual

AudioCodes MediaPack 1 Series
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
MediaPack Analog Gateways 7 MP-124
Hardware Installation Manual Notices
Warning: The device is supplied as a sealed unit and must only be serviced by
qualified service personnel.
Warning: Disconnect the device from the mains and Telephone Network Voltage
(TNV) before servicing.
Regulatory Information
The Regulatory Information can be viewed at http://www.audiocodes.com/downloads.
Document Revision Record
LTRT Description
59815 Updates for Version 6.6.
59840 FXS warning statement added; power surge drawings updated.
59841 MP-124 Rev. E model added.
59842 Velcro hook-and-loop cable tie for Telco connector updated.
59843 Max. power consumptions updated.
59844 Channels LED numbers when SRTP enabled.
59845 AC power cable warning (Japanese); MP-124 Rev. E supported software.
59846 Surge protection note for MP-124 Rev. E.
59847 Logo updated; mini-patch panel.

Table of Contents

Other manuals for AudioCodes MediaPack 1 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes MediaPack 1 Series and is the answer not in the manual?

AudioCodes MediaPack 1 Series Specifications

General IconGeneral
BrandAudioCodes
ModelMediaPack 1 Series
CategoryGateway
LanguageEnglish

Related product manuals