Model Description Part number
10GBASE-CX SFP+ 2-pair
twinaxial copper cable that plugs
into the SFP+ socket and
connects two 10-gigabit ports
SFP+ DAC 3 meter AA1403019–E6
10GBASE-CX SFP+ 2-pair
twinaxial copper cable that plugs
into the SFP+ socket and
connects two 10-gigabit ports
SFP+ DAC 5 meter AA1403020–E6
Operating power considerations
When you connect the device to collocated equipment, ensure that enough optical attenuation exists
to avoid overloading the receivers of each device. You must consider the minimum attenuation
requirement based on the specifications of third-party equipment. For more information about
minimum insertion losses for Avaya optical products, see Installing Transceivers and Optical
Components on Avaya Ethernet Routing Switch 3600 Series.
Locating end of sale notices
Use the following procedure to locate the most up-to-date information on end of sale notices and
replacement recommendations for transceivers and optical components.
Procedure
1. Go to the Avaya Support website at http://support.avaya.com.
2. Select Support by Product > Documents.
3. Enter the product name, and a release.
4. Select Product Lifecycle Notices.
5. Click Enter.
6. Select the End of Sale notice to view the information.
Checking status LEDs to verify switch installation
Perform this procedure to verify the hardware installation and operation of the unit.
The status LEDs on the front of the unit indicate the installation and operational status of the
hardware.
Locating end of sale notices
January 2017 Installing Avaya Ethernet Routing Switch 3600 Series 29
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General