Barco MDRC-2122 WP User Manual

4. Daily operation
4.2 On/Off switching
To switch your display on or off
1. Shortly press the Standby ( )key.
4.3 Bringi ng up the OSD menus
About the OSD menu
TheOSDmenuallowsyoutoconfigure different settings to make your Eonis display fit your needs within
your working environment. Also, you can retrieve general information about your display and it
s current
configuration settings through the OSD menu.
To bring up t he OSD menu
1. While the display is switched on, press the Menu/Enter ( )key.
As a result, the OSD main menu comes up in the middle of the screen. If no further actions are taken
within the following 10 seconds however, the OSD menu will disappear again.
4.4 Navigating th rough the OSD menus
To navigate through the OSD menus
1. Use the Right/Down ( ) and Left/Up ( ) keys to move through the (sub)menus, change values or
make selections.
2. To go into a submenu or confirm adjustments and selections, use the Menu/Enter (
)key.
14
K5903049 EONIS 19/02/2014

Barco MDRC-2122 WP Specifications

General

Brand	Barco
Model	MDRC-2122 WP
Category	Monitor
Language	English