5. Advanced operation
5. ADVANCED OPERATION
5.1 Video input source selection
About video input source selection
By default, your Eonis display automatically detects and shows the connected video input source. How-
ever, when for instance more then one video input source is connected, it may be needed to manually
select the input source to be displayed.
The available video input source selections for your display are:
• Auto: This is the default setting and will automatically detect and display the connected video input
source.
• HDMI: This setting will display the video connected to the HDMI input.
• DisplayPort: This setting will display the video connected to the DisplayPort input.
• VGA: This setting will display the video connected to the VGA input.
To select a video input source
1. Bring up the OSD main menu.
2. Navigate to the Input Selection menu.
3. Select one of the available video input sources.
5.2 L uminance adjustment
About luminance adjustment
The luminance of your Eonis display is adjustable over a predefined range. When you change the lumi-
nance, the display will adjust its backlight to reach the target.
To adjust the luminance
1. Bring up the OSD main menu.
2. Navigate to the Adjustments menu.
3. Enter the Luminance submenu.
4. Set a luminance value as desired and confirm.
5.3 Gamma selection
About gamma selection
Native, uncorrected panels will display all grayscale/color levels with equal luminance increments. Studies
have shown however, that in medical images certain grayscale/color parts contain more relevant informa-
tion than others. To respond to these conclusions, gamma functions have been defined. These functions
emphasize on these parts containing crucial information by correcting the native panel behavior.
The available gamma functions for your display are:
K5903049 EONIS 19/02/2014
15
To Next Page
Loading...
Need help?
General