Baumuller b maxx BM4400 User Manual

5
of 80
Application Manual POWERLINK Controlled Node
Document no. 5.13013.04
1INTRODUCTION
The application manual is an important part of the b maXX
®
4400 (ES) device. Therefore
this manual must be read completely, before starting any operation, last but not least on
behalf of the own security. This manual describes how the company Baumüller Nürnberg
GmbH implemented the option module POWERLINK Controlled Node for the series b
maXX
®
4400.
The introduction contains general information regarding the option module POWERLINK
Controlled Node.
1.1 General information
The POWERLINK Controlled Nodeoption module connects the b maXX
®
4400 (ES) via
the POWERLINK bus with other CoE nodes (e. g. PC, PLC, further b
maXX
®
4400 (ES),
I/O modules).
Information according option and function modules for the device series b maXX
®
4400 is
found in the manual 5.12008.
Information according the programming of the b maXX BM4000 controller is found in the
parameter manual 5.03039.
1.2 Content of instruction manual to POWERLINK Controlled Node
Each person being in charge of working at or with the device, must have read and under-
stood the instruction manual POWERLINK Controlled Node 5.12072 and the instruction
manual for b
maXX BM4000 5.12008 before starting to work with the device. This applies
even if the person concerned has already worked with such or similar devices or has been
trained by the manufacturer.

Baumuller b maxx BM4400 Specifications

General

Brand	Baumuller
Model	b maxx BM4400
Category	DC Drives
Language	English