Beckhoff CX5140 User Manual

Seconds UPS
3.2.2 FUNCTION_BLOCK FB_NT_QuickShutdown
The function block FB_NT_QuickShutdown can be used to trigger an immediate reboot, without stopping
TwinCAT or the Windows operating system.
Attention:
Attention
Loss of data
The function block FB_NT_QuickShutdown is used internally by FB_S_UPS_CX51x0. It
must not be used independently, because this could result in data loss!
FUNCTION_BLOCK FB_NT_QuickShutdown
VAR_INPUT
VAR_INPUT
NETID :T_AmsNetId;
START :BOOL;
TMOUT :TIME := DEFAULT_ADS_TIMEOUT;
END_VAR
NETID : AmsNetID of the controller.
START : Rising edge leads to immediate reboot of the control system.
TMOUT : Time out period.
VAR_OUTPUT
VAR_OUTPUT
BUSY :BOOL;
ERR :BOOL;
ERRID :UDINT;
END_VAR
BUSY : QuickShutdown is executed.
ERR : Becomes TRUE, as soon as an error occurs.
ERRID : Supplies the error number when the ERR output is set.
Prerequisites
Development environment Target plat-
form
Hardware PLC libraries to include
TwinCAT v2.11R3 Build 2047 or higher
TwinCAT 3.1 Build 4018 or higher
PC (i386) One-second UPS TcSUPS_CX51x0.Lib
CX51x0 27Version: 1.6

Beckhoff CX5140 Specifications

General

CPU Cores	4
USB Ports	2 x USB 2.0
Power Supply	24 V DC
Protection Class	IP20
Real-Time Ethernet	EtherCAT
Operating System	Windows Embedded Standard 7
Ethernet Ports	2
Operating Temperature	-25 °C to +60 °C

Summary

Foreword

Safety instructions

Essential guidelines for safe operation and installation.

Product overview

Intended use

System overview

Seconds UPS

S-UPS: capacitive one-second UPS

Explains the integrated power backup system for data protection.

Overview

Details the functionality and integration of the Seconds UPS with PLC programs.

Functions

Mounting and wiring

Unpacking, installation and transport

Covers procedures for receiving, handling, and installing the device.

Installation on the mounting rail

Step-by-step guide for mounting the device on a DIN rail.

Power supply

Explains the requirements and connection methods for the device's power supply.

Installation of passive terminals at the CX51x0 power supply unit

Commissioning/Configuration

BIOS setup

Instructions on accessing and configuring the system's BIOS settings.

Advanced

Chipset

Security

Boot

EtherCAT cable redundancy

Explains how to configure network redundancy for EtherCAT.

Operating CX51x0-N03x with TwinCAT

Guide for integrating and operating the device with TwinCAT software.

Switching on and off

Procedures for powering the system on and off correctly.

Error handling and diagnostics

Basic CPU module

Describes the status LEDs on the main CPU module for diagnostics.

Faults

Provides a guide to common faults and their potential solutions.