Beckhoff CX5140 User Manual

Commissioning/Configuration
5.1.5 Boot
Aptio Setup Utility - Copyright (C) American Megatrends, Inc.
Boot Configuration
Setup Prompt Timeout 5
Bootup NumLock State [On]
Boot mode select [LEGACY]
FIXED BOOT ORDER Priorities
Boot Option #1 [Service Stick]
Boot Option #2 [CFast/SSD]
Boot Option #3 [Hard Disk:]
Boot Option #4 [CD/DVD]
Boot Option #5 [USB Stick]
Boot Option #6 [USB Floppy]
Boot Option #7 [USB Hard Disk]
Boot Option #8 [USB CD/DVD]
Boot Option #9 [Network] → ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Options
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Quit
Boot Option #10 [USB LAN]
Boot Option #11 [OSLoader
Version 2.17.1246. Copyright (C) 2014 American Megatrends, Inc.
Boot Configuration
Setup Prompt Timeout
Options: none
Defines the time in seconds for which the request to start the BIOS is displayed.
A time between 0 and 10 seconds can be set. 0 means no display.
Bootup NumLock State
Options: On/Off
Defines the status of the numeric keypad. This option is usually switched on. If you use a keyboard without
numeric keypad, this option can be switched off.
Boot mode select
Option: LEGACY / UEFI / DUAL
Sets the boot mode.
Quiet Boot
Options: Enable / Disable
Quiet Boot can be used to influence the boot screen.
Fast Boot
Options: none
Defines the speed of the system startup:
Enable: This option speeds up the system startup by omitting some POST routines.
Disabled: During system startup the whole device configuration is tested (recommended).
FIXED BOOT ORDER Priorities
CX51x0 73Version: 1.6

Beckhoff CX5140 Specifications

General

Brand	Beckhoff
Model	CX5140
Category	Industrial PC
Language	English