© BEKA 201 All rights reserved5!
...a product of BEKA
7. General
7.1 Functional description
The integrated control unit GIGA-multitronic controls the central lubricaiton system. It can be installed at the pump GIGA
or GIGAPLUS.
Installing the integrated control unit at the GIGA pump, helps to control a progressivee lubrication system whereas the
installation into a GIGA PLUS can, depending on the equipment, control progressivee or sectional systems as well as
single line units and dual line units.
Operating modes and signals are shown via the display of the integrated control unit. The parameter (except the
lubrication system setting) can be set or changed directly at the control unit or by means of diagnosis software BEKA-
DiSys (from version V4.0.8.502). The bush for connecting the integrated control unit with a laptop or pc is coded in a
different way and can not be mixed up.
Fig. 1:
Display
Control element
Connection
for external
function
Connection
for external
function
Battery case
Connection for
software BEKA
DiSys
UNI-tronic
BEKATRON
V1.00
9
To Next Page
Loading...
Need help?
General
