38
6.6 Bluetooth connection lost
When the signal symbol flashes, the Bluetooth
®
connection between your
smartphone and activity watch has been lost. This can happen if the smartphone
and the activity watch are too far away from each other or there is interference
from other devices.
1. To check if the Bluetooth
®
connection between your smartphone and the ac-
tivity watch has been lost, press the STATUS button .
If the signal symbol
flashes, for example, the connection has been broken.
2.
iPhone:
If your phone is an iPhone and the Bluetooth
®
connection cannot
be made, go to Bluetooth
®
in your smartphone settings and delete the AW 85
from the list of connected Bluetooth
®
devices. Now re-connect the AW 85 in
the app via Bluetooth
®
.
Android:
If you are using an Android smartphone and the Bluetooth
®
con-
nection cannot be made, disconnect
Bluetooth
®
in the app and then connect
the AW 85 again.
Also check whether Bluetooth
®
is activated on your AW85. To turn
Bluetooth
®
on and o, press the SEARCH button for about two
seconds. If Bluetooth
®
is turned o on the AW85, no information is
displayed on the face when the STATUS button , SEARCH button
or CAMERA button is pressed.
To Next Page
Loading...
Need help?
General
