40
6.9 Camera remote timer
You can use the activity watch to trigger the camera on your smartphone (both
devices must be connected by Bluetooth
®
and be within an unobstructed range
of 5m). The watch allows you to easily and conveniently take photos using
the camera.
1. Open the “beurer HealthManager” app.
2.
Press the CAMERA button on the activity watch. The camera app will
open on your smartphone.
3.
Press the CAMERA button on the activity watch again. An acoustic signal
will sound and an instruction to take a photograph is sent to the smartphone.
When your smartphone camera is triggered, two brief acoustic signals will
sound one after the other.
In order to use this function, the smartphone must be switched on
and the Beurer HealthManager app must be open.
6.10 Connecting the activity watch to a new smartphone
If you want to connect the activity watch to a dierent smartphone, you first
need to delete the connection to the previous smartphone. Proceed as follows:
•
iPhone:
If you have been using an iPhone so far
, go to Bluetooth
®
in your
smartphone settings and delete the AW 85 from the list of connected Blue-
tooth
®
devices. Also disconnect in the app. Connect the new smartphone as
described in “5.2 Connecting the activity watch to a smartphone”.
•
Android:
If you have been using an Android smartphone so far
, disconnect
Bluetooth
®
in the app. Connect the new smartphone as described in “5.2
Connecting the activity watch to a smartphone”.
To Next Page
Loading...
Need help?
General
