30
Radio mode
Storing stations/Calling stored
stations
Select the desired memory bank.
If necessary, set the desired station.
Press the station button
1 - 5 < for approx.
2 seconds to store the current station under
the button.
- or -
Briefl y press the station button
1 - 5 < to
call up the stored station.
Scanning stations
The scan function is used to scan every receivable
station of the current waveband.
Press the MENU•OK
button ? for approx.
2 seconds to start the scan, or long to con-
tinue playing the currently set station.
During the scan, the display alternately dis-
plays "SCAN" and the current frequency as
well as memory bank or station name.
Note:
For radio mode, you can adjust the scan time
for each station (see the ch. "User settings",
section "Performing settings in the user
menu", "SCAN TIME" menu item).
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for
and store the 5 FM stations offering the strongest
reception in the region in one memory bank, Any
previously stored stations in this memory bank
are deleted in the process.
In the tuner regions "EUROPE" and "THAI", you
can store 5 FM stations in the FMT memory bank
with Travelstore. In the tuner regions "USA" and
"S AMERICA", you can also store 5 AM stations in
the AMT memory bank.
Select a memory bank of the desired wave-
band, e.g. FM1 or AM.
Press the BND
button B for approx. 2 sec-
onds.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
The tuner starts the automatic station seek
tuning; the display shows "FM TSTORE" or
"AM TSTORE". After the storing is completed,
the radio plays the station at memory location
1 of the FMT or AMT level.
Note:
For the tuner region "EUROPE": If the priority
for traffi c information is switched on (
),
only traffi c information stations are stored.
PTY
In the tuner regions "EUROPE", "USA" and "S
AMERICA", an FM station can transmit its cur-
rent programme type, e.g. CULTURE, POP, JAZZ,
ROCK, SPORT or SCIENCE. Hence, the PTY func-
tion allows a targeted search for broadcasts of a
certain programme type, e.g. for rock or sports
broadcasts. Note that PTY is not supported by all
stations.
Note:
To use the PTY function, you must activate
it separately in the menu (see the ch. "User
settings", section "Performing settings in the
user menu", "PTY" menu item).
Selecting a programme type
Note:
In the tuner region "EUROPE", you can adjust
the language in which the programme types
are displayed (see the ch. "User settings",
section "Performing settings in the user
menu", "PTY LANG" menu item).
Briefl y press the button
5 / >.
The currently selected programme type is
briefl y displayed, and you can select a differ-
ent programme type.
If necessary, press the button
5 / >
repeatedly until the desired programme type
is selected.
쏅
쏅
02_SanFrancisco300_gb_0309.indd 3002_SanFrancisco300_gb_0309.indd 30 26.03.2009 13:20:28 Uhr26.03.2009 13:20:28 Uhr
Downloaded from Caradio-Manual.com Manuals
To Next Page
Loading...
Need help?
General
Weight and Dimensions
