36
Sound settings
ent interfaces, you can assign an individual
device number to every interface (see ch.
"User settings", section "Performing settings
in the user menu", "C‘N‘C" menu item).
Starting AUX mode
Press the SRC button 6 repeatedly until
"CDC / AUX" appears on the display.
The playback starts.
Note:
You can enter a separate name for the rear
AUX input that is shown on the display in
AUX mode if you selected the connected au-
dio source (see ch. "User settings", section
"Performing settings in the user menu", "AUX
EDIT" menu item).
Sound settings
The following sound settings can be changed in
the Audio menu:
Adjusting bass and treble
Setting the left/right volume distribution (Bal-
ance) or front/rear (Fader)
Setting the boost of bass at low volume
(X-Bass).
In the Enhanced Audio menu, you can also per-
form the following settings:
Setting the 3-band equalizer:
Setting the middle level
Selecting bass, middle and treble
Adjusting quality factor for bass and mid-
dle
Performing advanced X-Bass settings (level
and frequency)
Selecting equalizer presettings
Note:
The settings for bass, middle and treble are
each stored for the current audio source.
쏅
•
•
•
•
–
–
–
•
•
Calling and exiting the audio menu
Briefl y press the AUD button A to open the
audio menu.
Press the button
@ / 2 repeatedly
until the desired menu item is selected.
Perform the setting (see the next section).
Briefl y press the MENU•OK button ? to
select a different menu item.
- or -
Briefl y press the DIS/ESC button = to exit
the menu.
Note:
The menu is automatically exited approx.
15 seconds after the last button activation
and you are returned to the display of the cur-
rent audio source.
Performing settings in the audio
menu
BASS
Bass level. Settings: -7 to +7.
Press the
button > to open the sub-
menu.
Press the button
@ / 2 to perform
the setting.
TREBLE
Treble. Settings: -7 to +7.
Press the
button > to open the sub-
menu.
Press the button
@ / 2 to perform
the setting.
BALANCE
Left/right volume distribution. Settings: L9 (left)
to R9 (right).
Press the
button > to open the sub-
menu.
Press the button
@ / 2 to perform
the setting.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
02_SanFrancisco300_gb_0309.indd 3602_SanFrancisco300_gb_0309.indd 36 26.03.2009 13:20:30 Uhr26.03.2009 13:20:30 Uhr
Downloaded from Caradio-Manual.com Manuals
To Next Page
Loading...
Need help?
General
Weight and Dimensions
