G2S A20 / G2S C20 User Manual V1.0
27 / 39
Fig. 16-1
(2) Cleaning the Water Chamber: You may also clean the water chamber with a soft cloth
which does not scratch the water chamber (dip the soft cloth in liquid soap if necessary),
rinse it thoroughly, and then wipe it dry with a soft cloth.
(3) Returning the Water Chamber according to instructions in 13.1.3.
WARNINGS!
• Emptying and cleaning the water chamber daily will help prevent mold and bacteria
growth.
• Allow the water in the chamber to cool down to room temperature before removing it from
the device.
CAUTIONS!
• Clean the water chamber only after the water in it cools. Make sure that no water enters
the device.
• After cleaning, rinse the water chamber throughly in clean water to make sure that no soap
residue is left; then wipe it dry with a lint-free cloth, so as to prevent calcareous
accumulations.
• Inspect the water chamber for any leak or damage. Replace the water chamber if any
damage is present.
• It is recommended to do daily cleaning of the water chamber.
16.4 Cleaning the Enclosure
Wipe the surface of the device with a soft, slightly damp cloth.
CAUTIONS!
• The device can only be used after the enclosure is dry, so that no moisture enters the
device.
• It is recommended to clean the enclosure once a week.
16.5 Cleaning the Tube
(1) Remove the tube from the device and mask before cleaning.
(2) Clean the tube in warm water which contains washing liquid, and then rinse it in clean
water thoroughly.
To Next Page
Loading...
Need help?
General
