54
1 Digital clock display
2 Symbol for memo function
3 Numerical input keys
4 Display unit changeover key
5 Clock function key
6 Memo function key
7 Start/Stop key
8 Date function key
312en101
The digital clock can be used to
d call up the time and date
d program a reminder signal (Memo)
every hour, for instance so that radio
news bulletins are not missed.
Calling up time and date
Press the appropiate function key (5/8).
In ignition key position 0 or with the
ignition key removed, the display
appears for a few seconds only; in igni-
tion key position 1 and beyond, the
value remains on display.
You can have the time displayed as a
12- or 24-hour clock and the date in
European or American order. Change-
over:
Press the function key (either TIME OR
DATE) and the display units changeover
key (km/mls) at the same time.
When the 12-hour clock is in use, the
letters AM or PM appear at the right of
the display.
Memo function
Press the MEMO key to switch this
function on and off.
The signal is heard 15 seconds before
every full hour. A sound-wave symbol
appears in the clock display to indicate
that the MEMO function has been
selected.
Digital clock
Online Edition for Part-No. 01 41 9 790 191 - © 12/98 BMW AG
To Next Page
Loading...
Need help?
General
