120 RIDING
AT EVERY 10TH CHARGING
PROCEDURE
Requirement
At every 10th charging pro-
cess:
Checking the front brake pad
thickness ( 147).
Checking the rear brake pad
thickness ( 148).
Checking the front and
rear wheel brake fluid level
( 149).
ESTABLISHING RIDE READI-
NESS
Pre-Ride-Check
After standby mode is turned
on, the instrument cluster
performs a test of the indicator
and warning lights – what we
call the "Pre-Ride-Check".
Turning on ride readiness
before the test is completed
will cancel the remainder of the
test.
Phase 1
All indicator and warning lights
are switched on.
After a longer standstill of the
vehicle, an animation is dis-
played during the system start.
Phase 2
The general warning light
changes from red to yellow.
Phase 3
All of the indicator and warning
lights that have been turned on
are turned off in reverse order.
If one of the indicator and
warning lights was not turned
on:
Have the malfunction
corrected as soon as possible
at a specialist workshop,
preferably an authorized
BMW Motorrad retailer.
Depending on the riding
mode or its configuration,
the intervention of electronic
stability control systems can be
restricted.
Possible restrictions are dis-
played as a pop-up message,
e.g. Caution! ABS & DTC
setting.
You can find more detailed in-
formation regarding electronic
stability control systems such
as ABS and DTC in the "Tech-
nology in detail" chapter.
To Next Page
Loading...
Need help?
General
