147
DANGER
Working with the high-volt-
age system.
Risk of death
The vehicle high-voltage sys-
tem is a self-contained sys-
tem. It is safe as long as no
work is performed on the
technical components.
Modifications and work on
the high-voltage system
should only be performed
by a BMW Motorrad partner
with appropriately trained
staff.
STANDARD TOOL KIT
1 TORX wrench, T25
Remove trim panel com-
ponents.
2 Hook wrench
Adjust spring preload
on the suspension strut
( 99).
BRAKE SYSTEM
Checking brake function
Operate right brake lever.
A clear resistance point can
be felt.
Operate left brake lever.
A clear resistance point can
be felt.
To check the hand brake, fold
out the side stand and push
the E-Scooter back and forth.
E-Scooter will not move.
If no clear resistance points can
be felt and the scooter can be
moved:
Have the brakes checked by a
BMW Motorrad partner.
Checking the front brake pad
thickness
Park the electric scooter,
making sure it is on level and
firm ground.
To Next Page
Loading...
Need help?
General
