123
In exceptional cases, the
high-voltage energy stor-
age system may heat up signif-
icantly while the vehicle is not
in motion (i.e. in extreme out-
side temperatures and direct
sunlight). If the high-voltage
energy storage system is over-
heated, the E-Scooter is not
ready to ride.
Very high temperatures
(over 95 °F (35 °C))
impede the service life of
the battery cells. If the high-
voltage energy storage system
overheats while riding, the
drive power is successively
reduced to cool down the high-
voltage energy storage system.
Th power gauge POWER in the
instrument cluster decreases
during this process. If the
temperature continues to
rise, park the vehicle until the
high-voltage energy storage
system has cooled down. If
the power gauge drops to 0,
the E-Scooter is not ready to
ride, and the vehicle comes to
a standstill.
Switching on ride readiness
Turn on standby mode
( 52).
Pre-Ride-Check is carried out.
( 120)
ABS self-diagnosis is per-
formed. ( 121)
ASC/DTC self-diagnosis is
performed. ( 121)
Apply the brake.
Press starter button 1.
Standby cannot be estab-
lished while the side stand
is extended. If the side stand is
extended with standby turned
on, standby is disabled.
E-Scooter is operational.
If the E-Scooter is not oper-
ational, the troubleshooting
chart may be of assistance.
( 182)
To Next Page
Loading...
Need help?
General
