Press and hold down button 1
until the hours number 2
flashes.
Repeatedly press the button
until the hours number is cor-
rect.
Press and hold down the but-
ton until the minutes number 3
flashes.
Repeatedly press the button
until the minutes number is
correct.
Hold down the button until the
minutes number stops flashing.
This completes the process.
Reading
Select display
Switch on the ignition.
Press button 1 to select the
reading in values area 2.
The following values can be dis-
played:
Odometer (shown)
Tripmeter 1 (Trip I)
Tripmeter 2 (Trip II)
with tyre pressure monitoring
(RDC)
OE
Tyre pressures
Warnings, if applicable
with on-board computer
OE
Press button 1 to select the
reading in values area 2.
The following values can be dis-
played:
Ambient temperature (°C)
Average speed in km/h
Average consumption in l/
100 km
Current consumption in l/
100 km
4
36
z
Operation
To Next Page
Loading...
Need help?
General
