To Next Page

To Previous Page

Turn the key counterclock-

wise in the seat lock.

When doing so, press the

seat downwards for sup-

port.

Raise the seat at the rear.

If the seat is laid on a

rough surface, the seat

edges may be damaged.

Lay the seat on the reference

side on a smooth, clean sur-

face, e.g. on the tank.

Let go of the key and pull

the seat from the retaining

bracket towards the rear.

Installing seat

Make sure the ground is

level and firm and park the

motorcycle.

If too much pressure is

applied in the forward

direction, there is a danger

that the motorcycle will be

pushed off its stand.

Make sure that the motorcy-

cle is steady on its stand.

Push seat forward into re-

taining brackets 1.

Operation

Other manuals for BMW K 1200 S

Questions and Answers:

Need help?

Do you have a question about the BMW K 1200 S and is the answer not in the manual?

General

Displacement	1157 cc
Transmission	6-speed
Dry Weight	227 kg (500 lbs)
Final Drive	Shaft
Engine Type	Liquid-cooled, 4-stroke in-line four-cylinder
Power	167 hp (123 kW) @ 10, 250 rpm
Torque	130 Nm (96 lb-ft) @ 8, 250 rpm
Fuel Capacity	5.0 gallons (19 liters)
Seat Height	820 mm (32.3 inches)
Frame	Aluminum bridge frame
Front Suspension	BMW Duolever
Rear Suspension	BMW Paralever
Front Brakes	Dual 320 mm discs, 4-piston calipers
Rear Brakes	Single 265 mm disc, 2-piston caliper
Wheelbase	1, 571 mm (61.9 inches)